CH-680植绒浆

适用于各种针织面料和梭织面料上的植绒转移印花。

Flocking Paste CH-680

General Description:

This product is used forflocking transfer printing on knitting or tatting fabric.

特性：

转移效果好，手感软、牢度好、耐水洗，流爽性好、不易塞网。

Features:

Good transfer effect,soft, good fastness,high washing-resistance, non-sticky, non-blocking, easy to operate,

使用方法：

1）该浆内配4-5%助剂，调均匀，直接印花。（添加助剂后4小时内用完）

2） 上浆后建议：压烫转移的温度为180℃左右，压烫时间为20秒左右，当天压烫为宜，如再经过隧道烘箱烘焙能达更佳的水洗牢度

Application:

1) 4-5% catalyzer must be added before use. Please stir evenly after adding the catalyzer into the paste. Be better to use up all the compound paste within 4 hours.

2) To hot-press for 20 seconds at 180℃after printing. Better to hot-press at the same day. For better the fastness , please use tunnel oven .